Top 9 Project Elemental Turntable UK – Home Audio Record Players

As an Amazon Associate I earn from qualifying purchases.



Pro-Ject Elemental USB Turntable, Grey

PRO-JECT #ad - Belt-drive with low-vibration synchronous motor for low operating noise. Usb digital output for digitizing your entire vinyl collection. Low-profile plinth design for stylish looks and minimal footprint. Please note: kindly refer the User Manual before use. 8. 6" lightweight aluminum tone arm and gold-plated RCA terminals for accurate and precise Audio signal transmission; Ortofon OM5E cartridge included.
BrandPRO-JECT #ad
ManufacturerVertical Cubed dba SUMIKO #ad
Height8.99 cm (3.54 Inches)
Length43 cm (16.93 Inches)
Weight2.75 kg (6.06 Pounds)
Width30 cm (11.81 Inches)
Part NumberElemental Phono USB Gray
ModelElemental Phono USB Gray

2. Pro-Ject Audio Systems


Pro-Ject Audio Systems Elemental Gray Audio Systems Elemental Hi-Fi Turntable, Silver

Pro-Ject Audio Systems #ad - Integrated motor control with DC power supply secures silent running. Low resonance particle board platter with felt mat. Belt drive system. Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom. Pre-adjusted tracking force and antiskating.
BrandPro-Ject Audio Systems #ad
ManufacturerPro-Ject Audio Systems #ad
Height30.48 cm (12 Inches)
Length9.14 cm (3.6 Inches)
Weight2.7 kg (5.95 Pounds)
Width43.18 cm (17 Inches)
Part NumberElemental Gray
ModelElemental Gray

3. Pro-Ject Audio Systems


Pro-Ject Audio Systems Cover-IT E Dust Cover for Elemental Turntables PCOVERITE

Pro-Ject Audio Systems #ad - Dimensions wxhxd: 471 x 103 x 331mm outside, 465 x 100 x 325mm inside. Just place over the whole turntable, when not in use. Crystal clear acrylic cover for Elemental and Elemental Phono USB turntables. Protects the turntable and needle.
BrandPro-Ject Audio Systems #ad
ManufacturerPro-Ject Audio Systems #ad
Height33 cm (12.99 Inches)
Length46 cm (18.11 Inches)
Weight1 kg (2.2 Pounds)
Width11.2 cm (4.41 Inches)
Warranty1 year.

4. Pro-Ject Audio Systems


Pro-Ject Audio Systems Primary E Turntable

Pro-Ject Audio Systems #ad - Primary e turntable in matte black finish. Ortofon om pick-up cartridge, detachable dust cover and felt mat included. Tracking force and Anti-skate pre-set with included cartridge. Direct to mains 230V motor. 8. 6” tonearm with sapphire bearings for optimal tracking.
BrandPro-Ject Audio Systems #ad
ManufacturerPRO-JECT #ad
Height11.2 cm (4.41 Inches)
Length33 cm (12.99 Inches)
Weight4 kg (8.82 Pounds)
Width42 cm (16.54 Inches)
Part NumberPRIMARY E



Pro-Ject Elemental, and Andover Audio SpinDeck Turntables, Pro-Ject Primary E, Acrylic Platter Upgrade for Pro-Ject Essential

SUPREMETECH #ad - All you need for installation is a hammer and a place to sit the platter while you hammer the spindle in. Dimensions: diameter: 11. 8 inches 300mm, height of post embedded in platter: 075 inches 19mm, weight: 3lb, diameter of post embedded in platter: 043 inches 11mm, Height of post on top: 075 inches 19mm, Thickness: 073 inches 18.

5mm, diameter of center hole: 043 inches 11mm, Diameter of post on bottom: 024 inches 6mm, 7oz 1560 grams, Diameter of post on top: 028 inches 7mm, Height of post on bottom: 1. 26 inches 32mm. Note: for more efficient packaging, the spindle is not installed. It is recommended that you place records directly on the acrylic platter with no mat to take full advantage of the properties of acrylic.

When you receive the platter you will need to follow the directions to install the spindle in the middle of the platter. Upgrade your listening experience with an acrylic platter. An acrylic platter decreases wow & flutter effects due to its higher mass which increases rotational inertia, and acrylic provides a cleaner and more detailed sound by minimizing unwanted vibrations as a result of its high density and low stiffness.
ManufacturerSupremeTech #ad
Height1.9 cm (0.75 Inches)
Length29.9 cm (11.77 Inches)
Weight1.56 kg (3.44 Pounds)
Width29.9 cm (11.77 Inches)
Part Number110-PE

6. Pro-Ject Audio Systems


Fully automatic turntable system with pre-adjusted OM 10 cartridge and built-in switchable Moving Magnet MM phono stage, Pro-Ject Automat A1, Black

Pro-Ject Audio Systems #ad - Electronically controlled playback speeds 33 and 45 RPM. 8. 3” aluminium tonearm with carbon fibre reinforced anti-magnetic headshell and pre-adjusted OM 10 cartridge with elliptical stylus profile. Damped metal platter for decreased wow and flutter, resonance-damped wooden chassis. Included accessories: power supply, 7‘‘ single adapter, Felt Mat, dust cover, Connect-IT E Phono Cable pre-fixed, Multilingual setup guide. Built-in switchable moving Magnet MM phono stage with gold plated RCA output connectors.
BrandPro-Ject Audio Systems #ad
ManufacturerPro-Ject Audio Systems #ad
Height13 cm (5.12 Inches)
Length36.5 cm (14.37 Inches)
Weight5.6 kg (12.35 Pounds)
Width43 cm (16.93 Inches)
Part NumberA1 (OM10) - BLACK UNI
ModelA1 (OM10) - BLACK UNI

7. Pro-Ject Audio Systems


Pro-Ject Audio Systems Cork-IT Turntable Platter Mat Upgrade

Pro-Ject Audio Systems #ad - Well-suited to metal platters, thanks to its enhanced damping properties. Upgrade turntable platter mat with improved sound characteristics. Avoids static build up often associated with felt mats. Improves timing of audio performance.
BrandPro-Ject Audio Systems #ad
ManufacturerPro-Ject Audio Systems #ad
Height0 cm (0 Inches)
Length0 cm (0 Inches)
Width0 cm (0 Inches)
Part NumberFBA_PS1940775011
Warranty1 year.

8. Pro-Ject Audio Systems


Xtension 9, Primary E, VT-E BT, Essential II/III, Pro-Ject Original Belt Fits Elemental

Pro-Ject Audio Systems #ad - Suitable for:. Manufacturer number: 1940675222. Black strap. Original Pro-Ject replacement part. Elemental, vt-e bt l&r, primary, Elemental Phono USB, vt-e l&r, primary E, Xtension 9.
BrandPro-Ject Audio Systems #ad
ManufacturerPro-Ject Audio Systems #ad
Weight0.01 kg (0.02 Pounds)
Part Number1940675222

9. Pro-Ject Audio Systems


Turntable with 8,6'' S-shaped carbon tonearm and Ortofon 2M Red Gloss white, Pro-Ject RPM 1 Carbon

Pro-Ject Audio Systems #ad - 8, 6” s-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments. Pre-fitted Ortofon 2M Red cartridge. Inverted platter bearing with ceramic ball. Precision belt drive using synchronous motor. Magnetic antiskating and counterweight with TPE damping.
BrandPro-Ject Audio Systems #ad
ManufacturerPro-Ject #ad
Height11 cm (4.33 Inches)
Length35 cm (13.78 Inches)
Weight3.8 kg (8.38 Pounds)
Width38 cm (14.96 Inches)
Part Number23569